pic

EWB MicroNed Stamper

MicroNed Stamper

24K Gold Needle

The MNS (MicroNed Stamper) can stimulate skin cells to induce
collagen production for skin regeneration. When lightly tapped on
the skin, the fine needles connected to the vial makes micro punctures
to the dermis (first layer of skin), effectively delivering the bioactive
stemcell cellular peptides solution into the dermis.

Application:

A. Hair Loss Treatment / Hair Restoration

The MNS (MicroNed Stamper) can be used effectively to prevent and stop hair loss from occurring. It can help with hair restoration and regrowth for those who are experiencing alopecia, balding, bald spots, receding hairlines and thinning hair. Tests showed that men with thinning hair who tried treatments with the MicroNed Stamper had experienced both an increase in hair growth and an average of 80% reduction in hair loss.

Note: For hair regrowth and hair loss prevention, the MicroNed Stamper must be used with our recommended Nanomised HFR (Hair Follicle Regenerator) Stem Cell Extracts.

Micro-needling of the skin is not a treatment for hair loss. However, the micro-channels created in the skin by micro-needling enhance penetration of HFR, dramatically increasing their effectiveness.

B. Eyebrow Regrowth & Restoration / Elongation

Can be done in the same soft micro needling stamping on the designated eyebrow area.

Important: In case of eyelash growth, we do not encourage the usage of NMS micro needling. The eyelash regrowth & restoration can be better done with our Eyelash HFR Non Invasive Applicator.

C. Skin Smoothening / Rhytides Eraser for Neck, Face & Hands

Using the MicroNed Stamper is also an effective way to smoothen your skin and removing rhytides(fine lines). By stimulating collagen and elastin production and repairing your skin from the inside, your skin will stay beautiful even as you get older. It is even more effective in preventing any wrinkles, scars, etc. from ever happening in the first place. Use the MicroNed Stamper with your HFR solution regularly, and your skin will stay healthy and smooth for many years to come.

MicroNed Stamper

Target user

For home, clinic, salon, and spa use, different treatments require different needle length. The device is suitable to be used on individuals age 14 years old and above.

Usage

Cleaning the device

  • Pour some alcohol (at least 75%) into a clean cup. Put the MicroNed Stamper into the alcohol for about 10-15 minutes, making sure all areas are submerged.
  • Take the MicroNed Stamper out, then immerse it in a cup of physiological saline for about 1-2 minutes. Allow the device to air dry on paper towel.

Cleansing the skin

  • Wash the surface of the skin area with a cleanser before treatment.
  • Pat with a paper towel to dry the skin.
  • Wipe the skin area with physiological saline, from bottom to top, and from the inside out direction.

Administrator

  • Before using the MicroNed Stamper, wash and dry your hands with soap and water thoroughly. Choose the right micro needle size for the device, then fill in the bottle with HFR solution.
  • The administrator must read the manual and understood thoroughly before using the device for treatment.

Important: For treatment application, avoid areas such as eyelids, lips, and blood vessels.

How to use the MicroNed Stamper

MicroNed Stamper

Routine cleaning and storage:

  • After the treatment, wash the MicroNed Stamper and glassbottle with running water.
  • Pour some alcohol (at least 75%) into a clean cup. Submerge the MNS (MicroNed Stamper) and bottle in the alcohol for about 10 minutes, then air dry on paper towel.
  • Seal the device properly and store in a dry place. Keep away from children.

Precautions

  • Do not share the MNS (MicroNed Stamper) with others to avoid cross-infection.
  • Do not use with other supplements, if you are not sure of the effect.
  • Do not use cosmetics on the stamped area for 3 days after the treatment. Avoid exposure under harsh sunlight. Wash the treated area with warm water. Refrain from taking spicy food.
  • To boost recovery of the skin after treatment, make sure to get enough rest and consumption of our special skin recovery and enhancing supplement.
  • If the skin is bleeding during and after the procedure, stop immediately and consult the doctor for assistance. It is common for the skin to show redness after the treatment. If any other abnormal reaction occurs, please consult the doctor.

Contraindications

Patients with a medical condition, skin condition or taking prescription medication should consult their doctor or dermatologist before using this device and treatment.

  • Do not use if pregnant or breastfeeding.
  • Do not use on skin cancer.
  • Do not use if you have a bleeding disorder or taking anti-coagulating medication.
  • Do not use if you are prone to keloid scarring.
  • Do not use if you have taken Accutane for the last 12 months.
  • Do not use if taking any medication that causes photosensitivity. Use on areas where topical medication is suitable for the application.
  • Do not use on raised moles or warts.
  • Do not use on open skin wound, broken skin, scabs, bleeding skin or blisters.
  • Do not use on cold sores or prone to cold sores.
  • Do not use on active, inflamed pustular acne.
  • Do not use on rashes, eczema or psoriasis, pustular rosacea, contagious skin infection or fungal infections.
  • Do not use post microdermabrasion, botulinum toxin,dermal fillers, IPL, chemical peels, or cosmetic surgery until inflammation from those treatment has resolved.
  • Do not use on sunburned skin before the it recovers.
  • Do not use with self-tanning lotion.
  • Do not use if your skin is sensitive to metal penetration.

Adverse effects

Ablative procedures can sometimes cause several unwanted side effects on ethnic or darker skin. You’re at risk if you have:

  • Light olive to darker skin tones.
  • Tanned skin (from natural sunlight and tanning beds).

It is because these skin types contain more melanin (the pigment causing skin colour). The more melanin you have, the higher your risk for skin damage is, and it can last for several months to years.

Common side effects of ablative procedures are:

  • Skin discolouration (hypo hyperpigmentation)
  • Burning
  • Blistering
  • Scarring
  • Infection (due to the removal of the epidermis)
  • Thinning of the skin

Conditions for a suitable treatment environment

Ablative procedures can sometimes cause several unwanted side effects on ethnic or darker skin. You’re at risk if you have:

  • A temperature range of +0°C to +40 °C.
  • A relative humidity range of 15%-93%, non-condensing.
  • An atmospheric pressure range of 700hPa to 1060hPa.

Conditions for transport and storage between uses of MNS

  • A temperature range of -20°C to +70°C.
  • A relative humidity range up to 93%, non-condensing.
  • Without atmospheric pressure range control.

Storage room conditions

  • Keep storage room walls and ceilings clean, and doors and windows tighten.
  • The environment around the storage room should be clean, free of dust, harmful gas, and other pollutants.
  • A storage room should be well ventilated, has proper fire protection, moisture-proof, mildew-proof, anti-pollution, and pest-controlled to deter infestation. Keep light exposure to a low minimum to avoid damages.

Transportation conditions

  • Avoid direct sunlight exposure. Do not place with any other harmful goods.
  • Stacking layer: 4 stacks.
  • Avoid to exposing the products to rain, or other moist elements.

Disposal

Disposed used devices according to local regulations after the product life cycle is expired. Alternatively, they can be returned to the dealer or the manufacturer for recycling or proper disposal.

Why EWB MicroNed Stamper?

FIND OUT MORE

pic

Specific order arrangement

CONTACT US NOW